Masks should be selected according to the type of danger to which the user may be exposed. The mask should fit the shape and size of the wearer's face. It is important that the mask is comfortable and comfortable. For proper protection, the chosen mask must fit the face properly.
Respirators are personal protective equipment designed to protect the user's respiratory tract from harmful particles, gases and vapors. These masks are ideal for those who work in dusty environments, are exposed to respiratory risks, or need general respiratory protection. It is widely used in sectors such as construction, healthcare, industry and automotive.
FFP; It means a disposable and maintenance-free mask containing a filter filter for breathing. It has classified the filtering performance of the mask as defined in EN 149:2001+A1:2009 standards.
- FFP1: Provides 80% protection against water and oil-based harmless dust and moisture.
- FFP2: Provides 94% protection against water- and oil-based harmless dust, moisture and smoke.
- FFP3: Provides 99% protection against water and oil-based harmless dust, moisture and smoke, some viruses, micro-biological environments and the pharmaceutical industry.
You can visit our definitions page for more detailed information.
This standard covers the minimum specifications for filtered half masks, which are respiratory protective devices used for protection against particles. For detailed information you can visit TSE (Turkish Standards Institute).
Respirators should be used in accordance with the instructions for use. Before putting on the mask, make sure your face and the mask are clean. When wearing the mask, ensure that the mask fits your face snugly. After removing the mask, make sure your face and mask are clean.
Respirators use filtration to protect the airways from harmful particles, gases and vapors. It traps harmful particles with filters and prevents them from entering the user's respiratory tract. The effectiveness of respirators varies depending on the type of mask and how it is used. In general, particle masks are more effective than gas masks.
Dolomite test is a test used to measure the clogging resistance of respirators. This test involves using the mask for 8 hours in a chamber filled with dolomite powder. At the end of the test, the breathing resistance of the mask is measured. Dolomite testing shows that respirators can provide sufficient breathing resistance even with long-term use.
- Infants and toddlers (under 5 years old)
- People with breathing problems (asthma, COPD)
- People with hearing problems
- People who have suffered facial trauma
Children under 5 years of age, people with respiratory problems, people with hearing problems, people with facial trauma and in the above-mentioned situations should avoid using masks.
- Choose the mask that best suits your working environment.
- Read the instructions for use carefully before using the mask.
- Make the settings of the mask in accordance with the way of use.
- Check if the mask suits your face.
- Check the mask before entering the usage area.
- Test for leakage by breathing, if there is a leak, perform the insertion process again.
- For mask sealing, the user must have no scars on the beard, moustache, face and head.
- To use the mask, there must be at least 19.5% oxygen in the work area.
- Masks are not used in airless places such as wells, warehouses and warehouses where there is not enough oxygen.
- Change the mask immediately when there is noticeable breathing resistance.
- Do not make any changes or repairs to the mask.
- Replace damaged masks before using them.
- Choose the mask with the appropriate degree of protection.
- Do not use against volatile aerosols.
- Protect it from dust and dirt for short uses.
- Not used in explosive areas.
- It should be stored in accordance with storage instructions.
- The temperature of the storage area should be between -20° C and +40° C.
- Storage area humidity should be maximum 80%.
- It should be stored away from sunlight.
- It is not recommended to use products that have expired.
- The shelf life of stored products is 2 (two) years.